The Allstar 111645 MVP Quik-Code is an F-connector antenna type 1-channel, 4-wire, 24-volt radio receiver that can be used with either the Allstar MVP remotes or the older Allstar, Allister, Pulsar, GTO, Might Mule code switch type remote controls that operate on 318MHz frequency. This Allstar 111645 MVP Quik-Code radio receiver can learn the code form up to 8 different code settings of MVP and/or the older models of code switch remotes on 318MHz frequency such as the Allstar, Allister, Pulsar 921T, 9921T, 931T, 9931T. Programming the Allstar 111645 radio receiver is easy to do by using the side mounted learn push button. The Allstar 111645 single channel radio receiver can replace the older Allstar, Allister and Pulsar 921R, 931R, 9921R or 9931R code switch type radio receivers. This receiver is ideal for use with gate openers or garage door openers that are located in a metal type enclosure or building as the antenna can be remotely located to a desirable location using an optional antenna mounting kit to provide for maximum range. The Allstar 111645 receiver operates on 24-volt AC or DC for the power and has an isolated maintained with remote signal normally open contact closure or it can be set to a pulsed output via an internal jumper connector. This is a brand new item that comes in a plain cardboard box with F-connector antenna, installation and programming instructions and is now manufactured by Linear Corp. part number 190-111645.
NOTE: This receiver will only work with remotes on the 318MHz frequency. A compatible 288MHz model is also available part number 112562 available as a special order only.
The Allstar 111645 Quik-Code radio receiver is compatible with the remotes listed that operate on the 318MHz frequency:
Allstar, Allister, Pulsar: 931, 931MT, 9931, 832, 8832, 833, 8833, 921, 921MT, 9921, 822, 8822, 9931TK, 8822TK, 8832TK, 9921MT, 9931MT, 8833OCS, MVP
Carper: CX-318, CX-318-1
GTO Mighty Mule RB741, RB742, RB743, RB744
Heddolf: P-219-1, P-219-2, P-220-1, P-220-2, P-220-3
Not all compatible models may be listed.
NOTE: Will not work with remotes on the 288MHz frequency
Controls one garage door or gate opener
Accepts up to 8 different remote code settings or unlimited number of remotes with the same code settings
Isolated N/O contact closure (momentary or maintained)
F-connector type antenna
Easy to program using the side mounted learn push button
One-Year manufacturers warranty
Power: 24V AC/DC
Output: N/O contact 10 Amp AC, 7 Amp DC maintained or momentary via internal jumper
Codes: Programmed from remote using learn button
Dimensions: 6.625 x 3.375 x 1.375 inches (includes tabs)
If you are not positive that this is the correct item for you, please email us. We are more that happy to assist you in determining the correct item for your application. If you need to contact us for assistance please include the Make and Model number of the garage door opener, radio receiver or transmitter. The more information you include for us, the easier it is for us to assist you in determining the correct item. We would rather have you contact us than end up with the wrong item and have to return it.