Hobbywing 3 in 1 Professional Program Box For Platinum Series ESC
This is another Hobbywing ESC Programmer. Has another set of parameters then the other one we have.Compare both of them, to find which is best for your needs.
You can quickly access option menu in the ESC and make the best setup like Start-up mode, brake force, no. of battery cells, etc. If you want to do it the "Hi-Tech" way, you can connect the ESC to this Program Box, then use the USB cable to connect the Program Card to your PC, with the CD-ROM that comes with the Program Box, you can view detail info and adjust the ESC settings.
Screen Display : 16x2 characters LCD
Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)
Power supply: DC 4.5V to 12.6V
(If the ESC hasn't a built-in BEC, you must use an additional battery pack to supply the program box)
Dimensions (mm): 90 x 51 x 17
Applicable for: XERUN Series Car ESC (V2.0 / V2.1), EZRUN Series Car ESC (V2.0 / V2.1), PLATINUM Series Quadcopter/Aircraft ESC
Works as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen.
Works as an USB adapter to link the ESC with a PC to update the firmware of the ESC or set the ESC by HOBBYWING USB LINK SOFTWARE .
Works as a Lipo battery voltmeter to measure the voltage of the whole battery pack or each cell.
The programmable items for the RC-CAR ESC are:
Drag Brake Force
Low Voltage Cut-Off Threshold
Maximum Brake Force
Maximum Reverse Force
Initial Brake Force
Throttle Neutral Range
The programmable items for the AIRCRAFT AND QUADCOPTER ESC are:
Low Voltage Protection Mode (Cutoff Mode)
Low Voltage Protection Threshold (Cutoff Threshold)
Built-In BEC Output
Priority Direct Mail 6-9 business U.S. & Australia Orders
Standard Registered Air Shipping 7-20 day delivery U.K. and other destinations.
1 3-in-1 Professional Program Box
1 USB Cable
2 Program Wire