RC6 is a perfect combination of fly mouse and remote control, which is based on the gyroscope mems system and provides accurate control and easy operation. Besides, it adopts 2.4G wireless transmission technology and the operating distance is up to 10m. Mini design and precise control make it perfect for smart media players with large-screen.
The life for the all buttons of the air mouse RC6 is more than 1.5 million times,these buttons can save energy and protect environment too.
When the mouse stays more than 2 minutes without working,RC6 will go into hibernation itself.
RC6 using the most famous CPU,low consume high efficiency,works well with 2 pieces NO.7 dry batteries,no need to charge lik lithium battery or worry about the lithium battery used life.
The air mouse RC6 use 2.4GHZ wireless transmission technology.The superior gaming experience,smooth operation experience brings more surprise to you.
Using of the air mouse
1.Double-click OK icon button "OK",the LED indicator become lighting,press the OK icon button again,LED indicator will become turning off.
2.While the LED indicator turning off pressing the android icon button without releasing,meanwhile turn your wrist,the cursor will follow your hand's moving.Then no matter you press any button of the keyboard,the LED indicator will fash one time.
3.While the LED indicator become lighting:
Now you need not to press any button,turn your wrist,the cursor will move.press the buttons of the keyboard,Led indicator will flash one time too.
The air mouse stays in 2 minutes without working.Press any button of the keyboard to active the RC6 and let it works.If you found the RC6 cann't work,you can try to use a small needle to press the reset key in the back cover of the RC6 and force the RC6 to work again.
When you use RC6,if you cann't see the cursor on the screen,then you need to do initialize setting to make the remote control match the USB receiver.Method:Don't plug the USB receiver into the device first,meanwhile press the left arrow key and up arrow key,the LED indicator will become flashing again and again,When the LED become turing off,that is mean doing initialize setting successful.
When the cursor appears to drift,and you cann't use RC6 to control the cursor,you need to do calibration setting.
Plug the USB receiver into the receiver's USB,when the cursor appears to drift,press the left allow key and down arrow key together,the LED light become turing off from lighting station,that is mean doing calibration setting successful.
What is in the box
1 * Air mouse
1 * 2.4G Mini receiver
1 * User manual