The Allstar 110548 MVP Quik-Code is a standard 1-channel, 3-tab, 24-volt radio receiver that can be used with either the Allstar MVP remotes or the older Allstar, Allister, Heddolf, Pulsar, GTO and Might Mule code switch type remote controls that operate on 318MHz frequency. This Allstar 110548 Quik-Code radio receiver can learn the code form up to 8 different code switch settings of MVP and/or the older models of code switch remotes on 318MHz frequency such as the Allstar, Allister, Pulsar 921T, 9921T, 931T, 9931T. Programming the Allstar 110548 MVP radio receiver is easy to do by using the side mounted learn push button. The Allstar 110548 single channel radio receiver can replace the older Allstar, Allister and Pulsar 921R, 931R, 9921R or 9931R code switch type radio receivers. Not recommend for gate openers that have a metal cover unless the receivers antenna can be located outside the metal enclosure. The Allstar 110548 receiver operates on 24-volt AC or DC for the power and the maintained with remote signal contact closure can be set to a pulsed output via an internal jumper connector. This is a brand new item that comes in a plain cardboard box with installation and programming instructions and is now manufactured by Linear Corp part number 190-110548.
NOTE: This receiver will only work with remotes on the 318MHz frequency. A compatible 288MHz model is also available part number 111962.
The Allstar 110548 Quik-Code radio receiver is compatible with the remotes listed that operate on the 318MHz frequency:
Allstar, Allister, Pulsar: 931, 931MT, 9931, 832, 8832, 833, 8833, 921, 921MT, 9921, 822, 8822, 9931TK, 8822TK, 8832TK, 9921MT, 9931MT, 8833OCS, MVP
Carper: CX-318, CX-318-1
GTO Mighty Mule RB741, RB742, RB743, RB744
Heddolf: P-219-1, P-219-2, P-220-1, P-220-2, P-220-3
Not all compatible models may be listed.
NOTE: Will not work with remotes on the 288MHz frequency
Controls one garage door or gate opener
Standard 3-tab connector
Accepts up to 8 different remote code settings or unlimited number of remotes with the same code settings
Momentary or maintained output
8-inch wire lead antenna
Easy to program using the side mounted learn push button
One-Year manufacturers warranty
Power: 24V AC/DC
Output: Switched voltage output maintained or momentary via internal jumper
Codes: Programmed from remote using learn button
Dimensions: 7.125 x 3.375 x 1.375 inches (includes tabs)
If you are not positive that this is the correct item for you, please email us. We are more that happy to assist you in determining the correct item for your application. If you need to contact us for assistance please include the Make and Model number of the garage door opener, radio receiver or transmitter. The more information you include for us, the easier it is for us to assist you in determining the correct item. We would rather have you contact us than end up with the wrong item and have to return it.