This is revised version of widely known EXTRA-PIC v2.0 programmer - DIL panels for 14-pin, 20-pin are added.
With this programmer you can program wide range of PIC controllers in 8-pin, 14-pin, 18-pin, 20-pin, 28-pin, 40-pin DIP cases. Other PIC controllers (in SMT variants) are programmed via ICSP connector ( In Circuit Serial Programming). It is connected to PC via COM-port with any standard COM-port cable
* SMT technology (bottom side)
* It is functionally compatible with software of JDM programmers, but unlike them EXTRA-PIC own the much better circuit schem., so it works more stable and faster :
* EXTRA-PIC V2.0 works with any COM-ports, as standard (+ /-12v; + /-10v) and with not standard COM-ports of some models notebooks (they COM-port lines having reduced voltage, down to + /-5v).
* Does not overload COM-port of a computer and at correct operation does not represent danger to COM-port (as a usual JDM programmer).
* Has a connector of ISP programming (ICSP - In Circuit Serial Programming).
* Build-in DC/DC converter guarantied work in a wide range of power supply voltage (+4..+13V)
* It is supported by widespread programs: IC-PROG, PonyProg , WinPic 800 and others JDM programs
* Programmer is connected to COM-port of a computer, through a standard COM port cable (DB9M - DB9F).
* Programmer need an external power supply in range from +4V up to +13V. Programmer has the built in protection against wrong polarity of a supply voltage
* On a PCB of programmer are installed:
- Button PWR ON/OFF
- The LED, the showing status "PWR ON" (green)
- The LED, showing presence of VPP (red)
- 2 different connectors for external power supply
- Built in step-up DC/DC the converter that allows to use a wide band supply voltage (+4V up to +13V)
- +5V (VDD) voltage regulator (78L05).
- 3 jumpers, allowing to choose VPP voltage (12.8V, 13.2V, 13.6V). By default recommended 12.8V
- connector of an in-circuit programming (ICSP).
- DIL sockets for programming microcontrollers in DIP8, DIP14, DIP18, DIP20, DIP28, DIP40 case (microcontrollers in other cases are connected through connector ICSP).
* High quality PCB