This product helps to test Diesel Injectors for opening pressure, leakage, spray patterns, atomization, chatter characteristics and leakage between injector needle and injector body.
With shut off valve.
Complete with transparent plastic tank 900ml and filter and 3pcs connecting pipes 1Pc-M14XM12 and 2Pcs-M14XM14
One of the tools required for diesel engines. Whether you need to remove the injectors, gain access to the Lambda sockets or simply want to test the opening pressure you will need to the right tools for the job.
3.5 Inch dial gauge reading 0-60MPa (600Bar) , also reading 0-8000psi
The liquid tank is provided with a filter.
It can also be used as a general purpose pressure tester on pipes, tanks, pump castings, etc. (May require addition connector adaptor Fitting)
where high pressure is required. can also be used for testing light crude oil injection valve
* Warning : Keep away from any heat places, we recommend using special fluids to operate the device properly, such as shell oil S.9365. or 1P Fanum Fluid CD. May also use pure clean diesel fuel only