FILMTEC TW30-1812-36 reverse osmosis membrane elements for home drinking water are the industry’s most reliable. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. FILMTEC TW30-1812-36 elements are shipped dry for convenient handling and long shelf-life. These elements are NSF/ANSI Standard 58 listed. Equipment suppliers can take advantage of FilmTec’s Standard 58 listing and participation in the NSF Data Transfer Protocol to reduce costs for reduction claims for their systems.
FILMTEC TW30-1812-36 home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi (please see the datasheet for more information).
Permeate Flow Rate
Stabilized Salt Rejection
Minimum Salt Rejection
FILMTEC Home Drinking Water Elements
Nomenclature: TW30-1812-XX. In the product name, "TW30" refers to the type of membrane, "1812" refers to the size of the membrane element, and "XX" refers to the rated flow in gallons per day at 50 psi.
Performance Guide for FILMTEC Home Drinking Water RO Elements:
Component NSF / ANSI Standard 58 Performance Test Component Also Reduces / Rejects †
Arsenic Pass Magnesium X
Barium Pass Calcium X
Chromium (+3) Pass Sodium X
Chromium (+6) Pass Nickel X
Cadmium Pass Mercury X
Copper Pass Zinc X
Cysts Pass Iron X
Fluoride Pass Ammonium X
Lead Pass Bicarbonate X
Radium (226/228) Pass Sulfate X
Selenium Pass Tannin X
Turbidity Pass Chloride X
TDS Pass Bromide X
Nitrate** Pass Sediment X
NOTE: The test data results may be transferred to other manufacturer's systems, if the systems meet the requirements contained on the document entitled, "Data Transfer Procedure for Devices using FilmTec Reverse Osmosis", dated 05/03/07 (document available on request from Dow or NSF).
** NSF requires individual R O system testing for nitrate, nitrite and cyst removal.
†These components have only been tested internally and are not certified for defined reductions by an independent laboratory
1. Permeate flow and salt rejection based on the following test conditions: 250 ppm softened tap water, 77°F (25°C), 50 psi (3.4 bar), and 15% recovery.
2. Permeate flows for individual elements may vary +/-20%.
THIS SALE IS FOR 1 MEMBRANE.