Data (Ethernet) Transmission and TV Signal Reception over Single Coaxial Cable
individual prices for resellers
4 years warranty
Made in the EU
This innovative product greatly saves the time required to install TV and data distribution in a house or flat. This significantly reduces the cost of the entire installation. At the same time, it significantly saves the material costs for installation and total cable consumption. The lengthy laying of separate data and coaxial cables is no longer necessary!
In addition, this product can be used not only for the distribution of data (internet) and television in the house, but can also be used to connect the home or apartment security system, IP cameras and videointercoms, to transfer phone calls using IP telephony, and more.
The multiswitch includes a data switch, so no external modem or network adapter is needed to operate the entire device. No setup needed, just plug and play.
This is a 9in/6out standalone EoC (Ethernet over Coax) multiswitch for distribution of 8 SAT IF signals including UHF band for up to 6 users.
External data link 1 Gbit/s (RJ45) (1000BASE-TX), 6 coaxial links 100 Mbit/s (100BASE-TX).
Power supply PA12 2A is included in the package.
For use mainly with EMP-Centauri NET CLASS NS01 wall sockets (EoC enabled end wall socket, outputs SAT+TV+2xRJ45, 100Mbit/sec.). The wall socket NS01 allows the splitting of satellite and terrestrial television signals as well as data (internet or computer networks) from a single coaxial cable with a 75 ohm impedance. The socket includes an internal 100 Base TX Ethernet switch. It is also possible to connect any Ethernet devices such as SMART TV, Wi-Fi router, PC, set top box, etc. via any of its RJ45 ports.
The multiswitch is compatible also with conventional satellite TV wall sockets, but EoC function is not possible for such wall sockets.
EoC standalone multiswitches are designed to build Coaxial networks for the distribution of terrestrial and satellite signals along with data connectivity.
Main features of NET CLASS EoC multiswitches, wall sockets and Coaxial networks built from them:
full access to antennas TV signals
support for Quattro LNB
active terrestrial input covers splitting losses
100 Mbit/s "Fast ethernet" traffic
full duplex communication
wall sockets with 2 x RJ45 ports
transparency for any kind of data
comply with applicable sections of IEEE 802.3, IEEE 802.3u, IEEE 802.3x
external power supply (included in the package)
maximum length of coaxial cable from multiswitch to NS01 wall socket is 100-150 meters
no latency increase
no setup needed, just plug and play
Use the same coaxial cable for :
terrestrial & satellite TV
internet access, VoIP
security control panel & sensors
video interkom & surveillance
any other IP-based devices
For indoor use only.
HDTV and UHDTV compatible
Parameter Condition Value
Frequency range LNB inputs 950-2150 MHz
Terr. input 5-862 MHz
Outputs 5-2150 MHz
Control of SAT TV
DiSEqC 1.0 (2.0) commands
Insertion loss Sat. 3 dB avg.
Terr. 2 dB avg. active / 20dB passive
Sat. inputs isolation Between V/H polarisations 25 dB min
Between low/high bands 30 dB min
Between sat. systems 30 dB min
Maximum input level* Sat. 105 dBµV avg
Terr. 90 dBµV avg
Maximum output level* Sat. 95 dBµV avg
Terr. 88 dBµV avg
Power consumption From each receiver 150 mA max.
Dimensions (w,d,h) 18.6 x 14.6 x 5.1 cm
Temperature range -25 ~ +60 °C
*Terr.: EN 50083-3/60dB IMA3 [dBµV]; SAT: EN 50083-3/35dB IMA3 [dBµV]
Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands:
command sent by receiver
selected sat. system
13 V, 0 kHz, DiSEqC A (1) A A
18 V, 0 kHz, DiSEqC A (1) B
13 V, 22 kHz, DiSEqC A (1) C
18 V, 22 kHz, DiSEqC A (1) D
13 V, 0 kHz, DiSEqC B (2) B A
18 V, 0 kHz, DiSEqC B (2) B
13 V, 22 kHz, DiSEqC B (2) C
18 V, 22 kHz, DiSEqC B (2) D
Multiswitches are not compatible with Monoblock LNBs
The AC/DC adapter PA12 is ideal for use with antenna devices like amplifiers, multiswitches, in communications, industrial automation etc.
Protection: Shortage Protection, Overload Protection, Over Voltage Protection
Shell Material: Metal case / Aluminium base
90-265 V AC, 50/60 Hz
12 V DC
2 A max
Efficiency 75% min
Dimensions (w,d,h) 16 x 6.4 x 5 cm
Temperature range -30 ~ +50 °C
See video on You Tube channel : https://www.youtube.com/watch?v=yIOY911Bu0A
We accept payment by: via PAYPAL. Once an auction finishes we will send an Invoice with detailed payment information along with the goods.
Goods are dispatched once cleared payment has been received. Please note we cannot offer collections as stock is shipped directly from our stockholder base.
Dispatches are normally made 8:00am – 17:00pm Mon to Fri as soon as cleared payment is received.
Terms of Sale
We represent that the goods are as they are described in the above listing. Genuinely faulty goods will be replaced or money refunded. We must be advised of any faulty goods within 30 days of receipt.
We believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. No warranty or representation (express or implied) concerning the accuracy of the information provided is given and customers should satisfy themselves that any product choice made is suitable for their intended purpose or use.
We pride ourselves on our customer service. In the rare event that you have a problem with your item please email us first before leaving negative feedback.
We are here to assist you between 07:00 to 17:00 weekdays. To contact us via email, please use the Ebay mailing system allowing us 12-24 hours to respond to your inquiry.
We offer Design and Consultancy Services:
Our consultancy service is based on a thorough understanding of our customers' needs.
Our specialized and professionally educated consultant will discuss your specific requirements and will recommend you a technical solution. If necessary, we will prepare a detailed Memorandum of Understanding to confirm what needs to be achieved.
We have an extensive knowledge of:
- Satellite and terrestrial TV distribution systems
- Cabling systems
- Technical requirements for products according to valid standards
Our people have invaluable experience of projects ranging in scope from home systems to medium or large networks of over hundreds of outlets.
Our consultants are able to fulfil many requirements: