individual prices for resellers
4 years warranty
Made in the EU
9in/60out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 60 users
With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 60 TV sets !!
Tired of constantly paying bills for television connection? Just for you is designed this satellite multiswitch. With its help, you will have available more free television channels and just one regular bill that you pay will be the electricity bill. The initial investment in this facility will be in a few months back.
For indoor use only.
HDTV and UltraHDTV ready
Parameter Condition Value
Frequency range LNB inputs 950-2150 MHz
Terr. input 5-862 MHz (passive)
40-862 MHz (active)
Outputs 5-2150 MHz (passive)
40-2150 MHz (active)
DiSEqC 1.0 (2.0)
Insertion loss Sat. 10 dB (950 MHz) - 0 dB (2150 MHz)
Terr. passive 35 ± 4 dB
Terr. active 5 ± 4 dB
Sat. inputs isolation Between V/H polarisations 20 dB min
Between low/high bands 20 dB min
Between sat. systems 25 dB min
Maximum input level* Sat. 90 dBµV avg
Terr. 110 dBµV avg (passive)
85 dBµV avg (active)
Maximum output level* Sat. 85 dBµV avg
Terr. 76 dBµV avg (passive)
80 dBµV avg (active)
Power consumption From each receiver 100 mA (18 V)
From external power supply 11 W (passive)
13 W (active) + LNB
Terr. preamplifier supply 150 mA max (12 V DC)
Dimensions (w,d,h) 35.5 x 44.0 x 5.0 cm
Temperature range -25 ~ +50 °C
*Terr.: EN 50083-3/60dB IMA3 [dBµV]; SAT: EN 50083-3/35dB IMA3 [dBµV]
Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands:
command sent by receiver selected sat. system input
13 V, 0 kHz, DiSEqC A (1) A A
18 V, 0 kHz, DiSEqC A (1) B
13 V, 22 kHz, DiSEqC A (1) C
18 V, 22 kHz, DiSEqC A (1) D
13 V, 0 kHz, DiSEqC B (2) B A
18 V, 0 kHz, DiSEqC B (2) B
13 V, 22 kHz, DiSEqC B (2) C
18 V, 22 kHz, DiSEqC B (2) D
Multiswitches are not compatible with Monoblock LNBs
If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters
Terminate all unused outputs by 75 ohm loads, if terrestrial band is used
A suitable cascadable unit can be placed before to extend the number of available outputs
We accept payment by: via PAYPAL. Once an auction finishes we will send an Invoice with detailed payment information along with the goods.
Goods are dispatched once cleared payment has been received. Please note we cannot offer collections as stock is shipped directly from our stockholder base.
Dispatches are normally made 8:00am – 17:00pm Mon to Fri as soon as cleared payment is received.
Terms of Sale
We represent that the goods are as they are described in the above listing. Genuinely faulty goods will be replaced or money refunded. We must be advised of any faulty goods within 30 days of receipt.
We believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. No warranty or representation (express or implied) concerning the accuracy of the information provided is given and customers should satisfy themselves that any product choice made is suitable for their intended purpose or use.
We pride ourselves on our customer service. In the rare event that you have a problem with your item please email us first before leaving negative feedback.
We are here to assist you between 07:00 to 17:00 weekdays. To contact us via email, please use the Ebay mailing system allowing us 12-24 hours to respond to your inquiry.