Golden Security Left Right Handle Smart Unlock 360 Degree Fingerprint Door Lock Home Security Anti-theft Access control system
This door lock uses a semiconductor living fingerprint sensor with a large amount of fingerprint storage and a resolution of up to 508DPI. Recording fingerprints is fast, accurate and flexible. The design of the fingerprint + key makes the setting easy. If you often encounter a large change of personnel, you can easily restore the factory settings and re-record the fingerprint.
For Bulk Orders Please Contact Us.
Let the door open as a pleasure.
360° live fingerprint recognition.
Using semiconductor living fingerprint sensor, Resolution 508DPI. Support 360 degree fingerprint recognition and living fingerprint recognition. Rejection of fake fingerprints.
Recording fingerprints is fast, accurate and flexible.
Fingerprint storage is large, can store 40 fingerprints.
Super convenient installation
A new generation of intelligent door locks, based on different door types, requires only one square hole for the installation. The lock core is located on the handle and does not require additional lock core holes. Easy to install, easy to maintain, easy to operate, suitable for any door type.
Just screw on the screw and you can use it
No wiring is required for installation. The circuit board is gathered on the handle. Just screw on the screw and you can use it.
Two ways to open doors
The left opening door and the right opening door are combined in two ways of opening the door. Fully meet your needs.
Emergency key unlock
The mechanical key is an essential accessory for emergency unlocking and equipment management. Please keep it in a safe place.
Easy factory reset
If your factory or your house changes people frequently, don't be afraid. You can easily restore the factory settings with the emergency key.
The e intelligent fingerprint lock is highly integrated, easy to install, easy to maintain, and suitable for any door type.
Add fingerprint: rotate the mechanical key clockwise for about 15-20 degrees and press the setting switch, hold it for about 3 seconds, until the blue light lights up and releases it after the sound of "di".Will want to set a finger on the fingerprint center contact, such as successfully collected data, will flash blue light and hear "di" a voice said to record a data, such as no record the good or fails, will flash a red light and heard "drops" to remind the acquisition is invalid, total five successful acquisition, 5 times, after the completion of the blue light long on and hear "di ~ ~ ~" a loud sirens, said adding fingerprint.The blue light flashes throughout the fingerprint entry process, but does not light up in multiple colors at the same time.Touch pressure of the finger requires multiple angles to collect, favorable expansion of the database, the sensitivity of the judgment is helpful!
Delete all fingerprints: rotate the mechanical key clockwise for about 15-20 degrees and press the setting switch, hold it for about 5 seconds (the blue light is on first and then beep 1), then release it immediately after the red light is on, the blue light is on and the sound of "di ~" is long, and all fingerprints are deleted.
Fingerprint identification to open the door: press the fingerprint, if the fingerprint is correct, the blue light will beep 1, the motor will turn to unlock the door, and the motor will turn automatically 6 seconds later;If the fingerprint is not correct, the red light will beep 2 times.
Emergency mechanical key unlock: insert the mechanical key and rotate counterclockwise about 45 degrees to press the handle to open the door.
a. the opening diagram is shown in the package opening diagram.
b. clutch adjustment: please adjust the position of the clutch before installation. The adjustment method is shown in the square steel mark: rotate the square steel pin to open on the right when it is flat with the handle, and the pin to open on the left when it is perpendicular with the handle.
c. S200X/S280X/S300X/S330X/S65TX left open right adjustment:Loosen the 3 screws of the limit piece of handle, rotate the handle 180 degrees, and fix it with the screw.S158X/S178X series left open right open adjustment: adjust the screw of the limit piece to the position of the limit lifting handle.
S168X series left open right open adjustment: panel rotation 180 degrees to install.
Please take good care of the mechanical key, the mechanical key is an essential accessory for emergency unlock and setting management!
Front and Back Panel
Payment We Accept
We Accept PayPal / Western Union / Money Gram
We ship all orders within 3 business day of payment.
We offer cosmetic and international delivery, please check the rates within our listing or email us with any questions.
Delivery Time is about 14 - 28 Business Days
All items qualify for returns within 30 days of receipt. Buyer is responsible for return shipping on any item that is not damaged.
We take our reputation seriously, we buy and sell online, so we understand the value of trust. If you are unsatisfied with your order, please contact us and we will work with you to resolve it to your satisfaction.