Tripp Lite SmartPro SMART2200RM2U 2200VA 120V Tower/Rack-mountable UPS w/ Bent

Add to FavoritesSign up for our NewsletterMost orders ship in 24 hours:HomeAbout usFeedbackPayment OptionsShipping InfoContact usStore search:Store categoriesTripp Lite SmartPro SMART2200RM2U 2200VA 120V Tower/Rack-mountable UPS w/ BentClick on above image to view full pictureClick on above image to view full pictureClick on above image to view full pictureClick on above image to view full pictureClick on above image to view full pictureClick on above image to view full pictureMore views:Manufacturer Manufacturer Tripp Lite Series SmartPro Model number SMART2200RM2U SKU UPTI009 #1300-1 Package Condition Used, UPS system is fully working. But back side is slightly bent and it have scratches around the case.(See pictures) Contents UPS system, mounting kit, USB, serial and EPO cabling. Warranty 30 Days Description 2200VA / 2.2kVA / 1920 watt line interactive UPS system with high power factor for server, network and telecommunications equipment. 2U rackmount or tower form factor with an installed depth of only 19 inches. Uninterruptible Power Supply (UPS) switches to battery-derived AC output during power failures and extreme voltage variations. SpecificationsNew Page 3 Output Output Volt Amp Capacity (VA) 2200 Output Watt Capacity (watts) 1920 Output power factor 0.87 Output Capacity Details Output de-rates to 1800w at 110V and 1670w at 100V nominal settings Nominal Output Voltage(s) Supported 100V; 110V; 120V Nominal Voltage details 120V default (voltage selection via back panel dipswitches) Frequency compatibility details Supports 60Hz at 110V and 120V nominal and 50/60Hz (auto-sensing) at 100V nominal. Built-in UPS output receptacles 4 5-15R outlet(s); 4 5-15/20R outlet(s) Built-in controllable switched load banks Three switchable single-outlet 5-15R load banks Output AC waveform (AC mode) Sine wave Output AC waveform (battery mode) Pure Sine wave Input Rated input current (at maximum load) 16A (120V), 16.4A (110V), 16.7A (100V) Nominal Input Voltage(s) Supported 100V AC; 110V AC; 120V AC UPS input connection type 5-20P Input circuit breaker 20A Recommended Electrical Service 20A 120V UPS Input cord length (ft.) 10 Payment OptionsShipping InfoReturn PolicyContact usNew Page 1 New Page 1 New Page 1 New Page 1 HomeAbout usFeedbackPayment OptionsShipping InfoContact usFind us on FacebookFollow us on TwitterAll rights reserved. Copyright © Compeve CorporationeCRATER Listing Template Design by: Corido online