Dual alternator plate for GM V-8 and V-6 engines with this drivers side air conditioner mount serpentine belt. Found on most serpentine belt 6.5 GM Diesels. Check your engine to see if you have the engine lift ring as shown in the upper right (rear) of the picture and the two tapped holes. PLATE ONLY - (the black part in the front of the upper picture) you will need to source the idler pulley and other parts - a bone yard will do fine for the pulley and spare alternator often. A CS-144 alternator will also fit with the same mounting holes. GM wiring schematic diagram and parts list is included - including recommended belt size. This is a replica with no alternator mount hole spacers welded on - use washers or a 1/2-13 plain nut instead. This is considered a custom order item and is not returnable.

READ THIS LISTING THOROUGHLY AS TO THE TERMS AND BENEFITS OF THE SALE. This page is managed and controlled by HPC Manufacturing owned by Wilbur Union as an Estate Business property. The charge on your card will show as HPCMANU, Norwalk, CA. The policies and terms of the sale are found at or through http://hpcman.com and / or http://bigbay4bestbuys.com. There may be more flexible shipping terms available there if this item is listed for sale there also. SEARCH the site with the title of this item to see. Our Terms of Service is found here => https://bigbay4bestbuys.com/content/terms-service-andor-use or by searching the SITE at bigbay4bestbuys.com. Those terms will govern this sale.

You need dual alternators to run any decent sized Hydrogen Generator system and the pump required to feed it at idle as a single alternator will not put out enough amps - even a high amp one