Main functions:
1.Fsk and DTMEcaller ID
2.Phone numbers/time check
3. The coming numbers display,quickly check and Re-dial
4.Electronic calender,time,colck and days of the week
5.High-low switch button for ringer sound adjust
6.Thunder-proof

INSTALLATION & USE
1.This telephone should be connect in the main line,if being connected
as an branch line,the display will be not showing or showing unclearly.
2.Install the telephnoe line to the native telecom’d signaljack,then
install the big black jack at the bottom of the telephoe.Then attach the
winding telephone cord to rhe smaller black jack at the bottom of the
telehone.
3.The function of caller ID performed can be applied Under the permit
services condition.
Sysem Enactment
4.In the state of hanging up,press to turn into the pattern of
enactment.At this ting,the screen will show the menu of enactment.Please
pressorto choose the different items.After you select one
item,please pressagain to turn into the enactment state,then press
theorto set up.After finish it,please press for the next item’s setup.

Set Up Time and Date
When the screen shows,press thekey to turn into the
enactment patten,when the number is twinking which is stand for
the,please pressorto edit the year,aftea the(set)to
comfirm,and then continue to set for the mouth.Lide this,when you finish all
the step,the screen will show the correct calender.

Set up the Area Code
When the screen show,presskey to return of area code
setup.when the screen showsand< -------- >ceaseless twinkling
wih the area number which you area number and then press SET tocomfirm it.The
user should set the area code for 5 litters.If the area code only has 4
letters,you must presskey twice to exit.

Check the caller ID
When someone calls you,telephone will turn into the “FSK”pattern with
showing the caller’s phone number.If the incoming number is a new one,the
screen will shou “NEW”if the incoming number is a repeated number is a
repeated number,,then rhe screen will show“REP”;If the phone call is a
personal number,then the screen will show

;if the phone call is an out-of
-town number,the screen will show;if the phone call is a wrong number,then
the screen will show.the user can press “UP”or “DOWN”to check the
callers ID.If you want to back-dialing the native number please press the“RD”key once,if you want to back-dialing the I.d.tel,please press the “RD”key twice.

Check the dialed number
You can press thekey,and then press to check the number which you
previously dialed.if you want to re-dial the checked number,just press
thekey directly

Re-dial function
Put the phone in hanging up state,then the user can choose the number
directly and then press theto dial the number.
Note:Because the electric current interferes for the network line user,the
caller ID function can not be used then.

The ways to check the simple malfunction
1.silence:please check whether the bnc connector Plrgs tangency with
the junction box all right or not.
2.Cacophony:please check if the telephone is loosed or desquamate,or whether there is some rust in the junction box.
3.The telephone will dial but it disconnects by itself when it is
ringing.please check to ensure the junction box is not wet,in additional,too
many branc telephones or a bad quality branch telephone.If these are not your
problem,then you can return it to us.
4.No caller ID displaying:please check whether you are using the
network line(for example:the telephone line of ADSL used)

Package included

1xtelephone