DJI NAZA-M V2 Flight Controller And NAZA-M V2 GPS Module

Description:
Brand Name: DJI
Item No.: NAZA-M V2
Item Name: Flight Controller And GPS

Specification:
Weight MC:27g
PMU:28g
GPS:27g
LED:13g
Dimensions MC: 45.5 x 32.5 x 18.5mm
PMU: 39.5 x 27.5 x 10.0mm
GPS&Compass 46(diameter)x10mm
LED: 25 x 25 x 7.0mm
Working Voltage Range MC:4.8V~5.5V
VU Input: 7.4V ~ 26.0 V (recommend 2S ~ 6S LiPo)
Output(V-SEN port red wire): 3A@5V (burst current:7.5A)
Power Consumption MAX: 3.15W([email protected])
Normal :1.638W([email protected])
Operating Temperature -10°C ~ 50°C
Assistant Software System Windows XP sp3 / Windows 7 / Windows 8
Supported ESC output 400Hz refresh frequency
Recommended Transmitter PCM or 2.4GHz with minimum 4 channels
Hovering Accuracy
(GPS Mode) Vertical:±0.8m
Horizontal:±2.5m
Max Yaw Angular Velocity 200°/s
Max Tilt Angle 35°
Ascent / Descent 6m/s,4.5m/s
Built-In Functions Multiple Autopilot Control Mode
Enhanced Fail-safe
Low Voltage Protection
S-Bus Receiver Support
PPM Receiver Support
Independent PMU Module
2-axle Gimbal Support
Supported Multi-rotor Quad-rotor I4, X4
Hex-rotor I6, X6, IY6, Y6
Octo-rotor , I8 ,V8 ,X8

NAZA-M Lite/NAZA-M V1/NAZA-M V2 difference:

Item Target Customer Hardware Software Function Extension Ability Major Components
NAZA-M Lite Lite AP/RC entry level ased on NAZA V1 platform;
no extension ability NAZA lite
Independent assistant
software and firmware 1.GPS (Optional)
2.No extended function (does not
support NAZAV2-PMU, Zenmuse H3-2D/NAZA
OSD/NAZA BT module/IOSD) MC
GPS(optional)
BEC/LED(Will have
independentBEC
and LED
in the future)
NAZA-M V1 AP/RC hobbyist Can be connected to the NAZA
V2-PMU, and will have the
NAZA-M V2 expansion function Share the same
NAZAM V2 assistant
software and firmware 1.GPS (Optional)
2.Function extension through NAZAV2-PMU:
such as Zenmuse H3-2D/NAZA OSD/NAZA
BT module/IOSD/Ground Station MC
GPS(optional)
BEC/LED
NAZA-M V2
GPS Combo AP/RC hobbyist 1.Optimized hardware structure
2.Independent PMU module with
amazing function extension ability
3.Independent LED module extension:such as
Zenmuse H3-2D/NAZA
OSD/NAZA BT module/IOSD/Ground Station MC
GPS
NAZAPMU V2
LED
Features:
All-in-one Design
The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.

Advanced & Improved Attitude Stabilization Algorithm


Nine Types of Multi-rotors Supported
Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V; ( Naza-M V2 does not support aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please use the vibration dampening devices accordingly.

Multiple Flight Control Modes/Intelligent Switching
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.

GPS Module Available/Accurate Position Hold
The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
New Assistant Software for Smartphone
iOSD mini supported
The Naza-M now supports iOSD Mini.
Intelligent Orientation Control
Enhanced Failsafe Mode
. Mode by default without the failsafe function.
Two Levels of Low Voltage Protections
Motor Arm and Motor Dis-arm
There are four ways to start the motors:
When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors.
Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.
Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience in supporting double spring TX; every time you let go of the throttle stick it will hover.

PPM, S-BUS & Ordinary Receiver Supported
Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy.

Independent LED Module
The Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade.

Built-in Gimbal Stabilization Function
The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.

Multi-rotor One-power Output Fail Protection
In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. When payload is heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure can cause rudder to become out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, keeps attitude under control even with any one power output failed and highly reduces crash risk.

Remote Gain Adjustment
The default parameter settings are preset for you to achieve a normal flight, and also supports remote parameter adjustment by using a control slider on the TX during flight in order to obtain better performance.

New Assistant Software & Firmware Online Update
The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience. Instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is additional information. The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online.

Priority Direct Mail 6-9 business days U.S. & Australia
Express Mail Service 7-15 business days U.K. and other destinations
Package Includes:
1 DJI NAZA-M V2 Multi-rotor Flight Controller
1 DJI NAZA-M V2 GPS Module
1 DJI NAZA-M PMU V2 Multi-function Module
1 DJI NAZA-M V2 LED Module