Easy installation for users of all levels with iCAMView Utility (a step-by-step installation wizard)

View images from your web enabled PDA

Monitor multiple IP Camera using iMultiView(a Windows based freeware)when you make a purchase

Flexible Motion Detection and Image Recording functions

Email notification for Motion Detection, daily report, etc...

Configure up to 4 viewing time frames (Permit Hours)

Able to display multiple images on a single screen

Support up to 30 simultaneous remote viewers per USB camera

Display viewers IP, account, viewed camera, login time and total downloaded bytes

Detailed event log with listing options

Detailed event log with listing options

Event listing by Level and Type

Limit the max FPS to each of the 8 user account

Number of Viewers control per USB camera (max of 30 viewers/camera)

Block / black-list up to 256 IP addresses from accessing IP Camera

Schedule up to four time slots when motion detection is active

Upload motion detected images to a specified FTP server

Schedule up to two time slots for image forwarding (to email or FTP server)

Update firmware directly from IP Camera webpage

Save current settings to a file making settings recall easy

Specification:


VIMICRO ZC0301 Plus processor inside

Colour CMOS VGA sensor with 350,000 pixels

MJPEG compression

Up to 30 frames per second

USB Interface, reverse compliant with USB 1.1 specifications

Focus Distance: 5cm to infinity, manually adjustable Focus Lens

Minimum illumination: 2.5 lux @f1.4

Visual angle: 51/60 degree horizontal

Auto Control for White balance, Exposure, Colour/Brightness

Operating Temperature: 0C to +40C

USB Controlled Pan/Tilt, RS232 port not required

USB cable length: 1.5 meters

Pan: 320 degrees

Tilt: 60 degrees