1997 - 2004 C5 Chevrolet Corvette 2 Rear BREMBO Brake Rotors

COMPATIBILITY CHART
Part#: 27292
Part Type: Rear Brake Rotors

CHEVROLET
CORVETTE 1997-2004
2004 V8-350ci 5.7L F/I Vin G
2003 V8-350ci 5.7L F/I Vin G
2002 V8-350ci 5.7L F/I Vin G
2002 V8-350ci 5.7L F/I Vin S
2001 V8-350ci 5.7L F/I Vin G
2001 V8-350ci 5.7L F/I Vin S
2000 V8-350ci 5.7L F/I Vin G
1999 V8-350ci 5.7L F/I Vin G
1998 V8-350ci 5.7L F/I Vin G
1997 V8-350ci 5.7L F/I Vin G

CORVETTE Z06 2003-2004
2004 V8-350ci 5.7L F/I Vin S
2003 V8-350ci 5.7L F/I Vin S

You are purchasing 2 brand new BREMBO Rear Rotors for a C5 Corvette.
The rotors are manufactured by BREMBO and are the large surface directional rotors that will install on 1997 - 2004 Corvette.

Brembo is the Original Equipment Manufacturer to many of the most prestigious names in automobiles, and its quality and workmanship is impeccable.

If you are looking for a quality product that will give trouble free service then BREMBO is the name you want.

Check the COMPATIBILITY CHART for your specific vehicle.

Thousands of miles of driving in all types of weather conditions is hard on brakes. And while drivers expect their vehicle’s disc brake pads to wear out over time, they don’t always realize that their vehicle’s brake rotors are wearing too.

The pressure and heat generated by the brake pads rubbing against the brake rotors combined with the dirt and debris that gets between them wears away metal, slowly removes the material that was designed to act as a heat sink to maintain braking performance and efficiency.

Once brake rotors have worn to their minimum thickness it’s time to replace them along with the pads.

Brembo is best known for its racing and race-inspired high performance braking systems.
Brembo is also a global supplier of brake rotors and other brake components.
Brembo manufactures over 26 million brake rotors annually in over a thousand different designs.
Brembo is used by original equipment manufacturers and original equipment suppliers.
You can have Brembo quality in original equipment replacement brake rotors that are fully compatible with your vehicle’s original brake system. And as you would expect, Brembo OE Replacement Brake Rotors are designed to equal or exceed the performance of the original equipment rotors that came on your vehicle.

For that matter, in order to provide higher levels of performance and comfort, Brembo even developed one-piece cast rotors to replace original equipment two-piece rotors that feature economically stamped steel centers fastened to the braking surfaces. Starting with a casting from a Brembo foundry that assures uniform thickness, Brembo OE Replacement Brake Rotors are machined to exacting tolerances (the rotor run-out tolerance is only 0.0025”, about half of the industry norm), feature a braking surface finish (ground or fine turned) compatible with the vehicle’s OE specifications and are electronically balanced to minimize the possibility of vibration. Brembo offers its OE Replacement

Rotors with the same levels of quality, technology and performance that have earned it Dodge Viper, Ferrari, Ford Mustang Cobra and Mercedes-Benz OEM fitments.

All Brembo OE Replacement Rotors are manufactured under QS-9000 and ISO 9001 certifications to ensure the highest level of quality. Brembo brake rotors offer applications for most every automobile — domestic to import, compact car to luxury SUV.

NOTE: Brembo Original Equipment (OE) Replacement Rotors should always be installed in axle pairs to maintain the most effective brake performance.

Looking for something you cannot find? Email us!

EMAIL US FOR YOU SPECIFIC APPLICATION AND SHIPPING COSTS

_____________________________________________

ABOUT Feedback

It is kindly requested that BEFORE leaving anything but a positive feedback that you attempt to contact us by email to resolve ANY issues. Every effort will be made to service your expectations. Feedback is provided to the ones that leave it. Thank you for looking.

BUYERS please check the part to your satisfaction and be sure to yourself that it can be used in your application. The part number supplied is from the part itself or its packaging. It is presumed to be correct, and can be used as reference to suppliers and dealers. Any problem that should arise with your part(s) order will be reviewed totally on it's own merits, otherwise there is NO implied warranty.

Please take time to read our TERMS of service and FAQ.