CRC AIR SENSOR CLEAN PRO
Air Flow Sensor Cleaner (DFID)

general description
CRC AIR SENSOR CLEAN PRO restores efficiency, improves performance and
increases the reliability of mass air flow sensors (Mass Air Flow Sensors),
used in modern injection engines. Cleans quickly and effectively as
thermistor, and the heated thread or film. CRC AIR SENSOR CLEAN PRO is
effective,
highly purified
precision
solvent,
developed by
at
according to modern requirements. The basis of the funds are quickly drying.
naphthenic solvents free of chlorine glycol and other chlorine components.
Properties

It even penetrates quickly into very narrow pores and cracks in the surface.

Ensures optimum performance of the injection engine during startup.

Provides the processor with the correct information to adjust
the formation of the fuel mixture depending on the engine load.

Provides more accurate gearshift information for the unit.
control automatic transmission.

Quickly cleans and removes all dirt from the sensor.

Ozone-safe agent (ODP = 0.00).

Periodic planned use (especially after replacing the air filter)
maintains efficiency and extends sensor life.

The product does not conduct current and is not a source of corrosion.

Fully evaporates, leaving no residue and sediment.

Means safe for all metal surfaces, most rubber products, plastics
and coatings. Test before use on sensitive plastic
surfaces, glued parts and parts under mechanical stress.

Aerosol cans are equipped with a 360 C° valve (works in any position of the cylinder) and
additional tube nozzle for ease of use.

The aerosol is under the pressure of a non-flammable (without impurities) CO2 propellant, which means
the content of the useful product is up to 97% of the volume of the cylinder (that is, 30% more than
using common hydrocarbon propellants).

Application
Specially designed for various types of air flow sensors:

Wire (thread)

Film
After replacing the air filter, it is recommended to clean the air flow sensor with
Using CRC Air Sensor Clean Pro before starting the engine.

Instructions
Highly flammable composition. Do not spray on live electrical equipment or
electrical networks, deactivate them before using the product, as well as extinguish near the place
product use all sources of fire, warning lights, pilot flames and heating
appliances.
Before use, pre-test on sensitive plastic surfaces,
glued parts and parts under mechanical stress.