10 minute flushing of the POWER SAFE engine, 320 ml

It is recommended for cleaning oil systems of gasoline and diesel engines with high mileage, when switching to another type of oil, as well as exceeding the oil change intervals.

A special formula for engines with high mileage allows you to remove most of the strongest varnish and slurry deposits.
Effectively and safely removes oil decomposition products and engine wear without clogging the oil receiver and oil system channels.
It extends the life of a new oil by 10-20% due to a significant reduction in non-leaking residue in the system by more than 2 times.
Penetrates into the most inaccessible places and cleans all internal hydraulic drives in the engine.
The composition contains an increased concentration of detergents and extreme pressure additives.

It is recommended to apply before each oil change, after sizing and when switching to a different type of oil.

Warm up the engine to operating temperature and switch off.
Pour the drug into the oil filler neck and start the engine.
Allow to idle for 10 minutes.
MOTION ON THE CAR IS FORBIDDEN!

Stop engine and drain used oil.
Change the oil filter and add new oil.
Packaging of the drug is designed for an oil system with a volume of 4-5 liters.