SNOW-WHITE ENAMEL FOR HEATING RADIATORS

Quick-drying alkyd enamel. It forms a durable snow-white glossy coating that does not turn yellow over time and is resistant to detergents.

It contains anti-corrosion components, due to which it can be applied to products made of ferrous metals.

It has high adhesion to the painted surface, increased hiding power and weather resistance, which allows to give the coating durability and maintain high aesthetic properties for a long period.

The aerosol form of release allows you to evenly paint products with complex geometry, as well as paint hard-to-reach areas.

Designed specifically for painting surfaces that heat up to +100 ° C: heating radiators, water heaters, pipes and other devices and elements.

It can be used both for internal and external works.

Suitable for painting pre-primed wood and plastic surfaces to give them decorative properties.

Application Features:
Before applying the enamel, it is necessary to prepare the surface: clean from rust and dirt, degrease and dry the surface. Protect surfaces that are not susceptible to staining, film or paper to prevent traces of the composition.

Shake the bottle vigorously for 2-3 minutes before use. Enamel should be applied at an ambient temperature of at least + 10 ° C from a distance of 25-30 cm in 2-3 layers, with intermediate drying for 10-15 minutes. During the application of enamel, periodically shake the bottle.

Drying time "on stick" at a temperature of +20 ° C is at least 40 minutes. Full drying time at a temperature of + 20 ° С - at least 5 hours.

In order to avoid clogging of the spray head, it is recommended to turn the container upside down and spray at the end of work until clean gas flows.

It is allowed to apply on a hot surface.