ABRO CALIPER PAINT

Creates a durable, durable coating that can withstand extreme braking loads.
Withstands temperatures up to 260˚С.
A unique formula with the addition of ceramic polymers.
The paint has successfully passed multiple tests in heavy vehicles.
Specially designed for painting calipers, brake drums, discs and springs.
Available colors:
Black
Silver
Mode of application:

1. Clean the surface from dirt, dust, flaking paint, wax using the ABRO® Brake Cleaner.
2. Protect surrounding surfaces from paint. Sand the surface lightly with 320 grit sandpaper or equivalent.
3. Apply paint at a temperature of 20 to 30 ° C, with a moisture content of not more than 50%.
4. Thoroughly shake the balloon for at least a minute, after the appearance of a knocking ball inside. Shake once a minute for 10 seconds.
5. Keep the container parallel to the surface to be painted at a distance of 20–25 cm and apply the paint with smooth overlapping movements. Apply thin coats of paint to prevent smudges. Stain for no longer than one hour.
6. Wait 10 minutes before applying each coat.
7. After use, clean the spray gun by turning the can over and blowing off the head until the ink stops flowing. If the sprayer is clogged, clean it with solvent, do not pierce with a needle.

If after 1 hour you need to apply another coat, wait 7 days before staining. This is necessary to ensure complete drying of the applied layers. The top layer begins to dry after 1 hour. Drying time 3 hours. The cylinder consumption is 1–1.3 m² or 4–6 calipers.