Valvoline™ DPF Cleaner

Tool to loosen and remove ash deposits in diesel-particle filter systems, without disassembly


Applications

Diesel-particle filter systems
Product characteristics
Fast acting
Solvent free
Non-corrosive
Non-flammable

Directions for use:
Before use, carefully read the directions on the
packaging.
Valvoline™ DPF Cleaner should be at room
temperature before use. The processing
temperature should be between 5 to 30°C. Shake
before use.
Before use, allow the engine to cool down
(maximum 50°).
Disassemble the temperature or pressure sensor
from the filter.
Insert the special tube into the opening and
empty the can in the following intervals:
Spray 3 to 5 times; allow to soak for 5 seconds.
Install the temperature or pressure sensor.
Start the engine and allow to run stationary for at
least 15 minutes to evaporate most of the fluid.
Make a test drive of 30 minutes. This may cause
the formation to steam.