Engine oil additive designed to clean the engine
Eurol Engine Flush is an additive designed to clean very dirty engines to extend engine life. After flushing the engine, both throttle response and acceleration increase.

Eurol Engine Flush is added to the old oil and left to circulate in the engine. Just warm up the engine to operating temperature and add the Eurol Engine Flush. Eurol Engine Flush uses old oil as a delivery mechanism where carefully selected additives dissolved in oil gradually and carefully remove deposits from the engine, removing them from the engine by draining the old oil.

Warm up the engine and turn it off. Add the additive to the engine and start it. Run the engine stationary for at least 5 minutes. For best results, start the engine for 15 minutes. Drain the engine oil and fill the engine with new engine oil in accordance with the tolerances of the vehicle manufacturer. A 500 ml bottle of Eurol Engine Flush is recommended for use from 3.5 liters to 6.5 liters of engine oil. Eurol Engine Flush is recommended for use at the service intervals specified in the user manual. You do not need to drain old oil to make room for this additive.

Eurol Engine Flush removes varnish and deposits without softening seals or gaskets. Fragments and deposits can either be dissolved by the additive, or they can be trapped in an oil filter. Therefore, it is recommended to replace the oil filter after flushing the engine.