Final cleaning of gasoline power systems. It is applied through a tank after professional cleaning by the JetClean Plus device. Reduces the content of CO and CH in the exhaust. The fluid has been tested for compliance with international CEC standards. Eliminates problems during cold start of the engine, non-uniformity of idling, drop in power and throttle response, loss of smoothness, high content of toxic substances in the exhaust. Helps soften and eliminate deposits in combustion chambers, valves, pistons and rings. Does not affect rubber seals and hoses. It is also added to a cleaned fuel tank as a preventative measure.

A comprehensive preparation for gasoline systems, an additive for adding to the fuel tank. It mixes with fuel and cleans the injection system and combustion chamber from deposits and contaminants.

- Removes coke deposits and deposits from the dispenser and the injection valves
- Effective for any fuel injection system
- Precise injection dosing and spraying
- Provides optimal driving and low fuel consumption
- Guaranteed low exhaust emissions
- Increases operational reliability and cost-effectiveness

Using the Pro-Line Benzin-System-Reiniger allows final cleaning of gasoline injection systems, and can also be used to prevent repairs.

For all gasoline injection systems and carburetor engines. It is added to the cleaned fuel tank as a preventative measure, and after cleaning the injection system using the JetClean. When adding an additive to the tank, the amount of fuel should be at least 2/3 of the total volume (40 liters). Mixing with fuel is automatic. The content of the spray is enough for a maximum of 70 liters of fuel.