Professional agent that restores and stabilizes the high temperature viscosity of engine oil. It stabilizes the pressure. Provides protection of engine components at high loads on it. Prevents a drop in engine oil viscosity during frequent cold starts. Reduces oil consumption for waste due to the improvement of its sealing properties. Highly recommended for older cars. Reduces noise during operation of hydraulic lifters and increases compression. Does not impair the starting properties of cold oil. It is recommended for use in the middle of an interservice run and with extended oil change intervals.

The additive is based on polymeric chemicals that increase the viscosity index. It significantly improves the viscosity-temperature range of the oil, but the additive does not have the properties of a depressant, i.e. does not affect the low temperature properties of the oil.

- Fully compatible with modern synthetic and mineral motor oils for gasoline and diesel engines.
- The technology of additives that increase the viscosity index of engine oil fully complies with the requirements for modern universal engine oils.
- Stabilizes the viscosity of the engine oil depending on operating conditions, which is especially important with frequent changes in shear loads between the piston and cylinder.
- While maintaining the viscosity grade of engine oil, the additive provides the best lubricating properties, thereby reducing wear and improving the compaction of the CPG

Visco-Stabil Viscosity Stabilizer restores the viscosity characteristics of the oil, which reduces its waste and consumption. The tool is a convenient and quick solution to the complex problem of the oil system.


Fully compatible with synthetic and mineral oils for gasoline and diesel engines. Add 300 ml of additive to a maximum of 5 liters of engine oil at any time, as needed.