Automotive quick-drying coating based on rubber and synthetic resins to protect the lower body panels from chips and corrosion. Forms a transparent resistant film that does not change the appearance of the machined parts.

Appointment: for processing body thresholds, wheel arches, front and rear aprons, spoilers, lower panels of car doors.

Action: prevents corrosion, effectively protects from the damaging effects of aggressive substances, road salt, acid precipitation.

Withstands low and high temperatures.
Not cracking.
It dries quickly.
Protects the paint layer from abrasion: sand, small stones flying out from under the wheels when the car is moving.
Additionally:

provides noise reduction in the car;
improves the dirt-repellent properties of the coating;
facilitates washing in the winter;
significantly extends the life of the body.
Compatibility: after drying it can be painted with car enamels and primers.

Use at ambient temperature from +15 to +30 ° C.

Thoroughly wash the treated surfaces with car shampoo, clean all types of contaminants with white spirit (or another non-aggressive solvent) and dry.
Check the “Anti-Gravel” and solvent for compatibility with the material being processed on an irresponsible surface area.
Protect the unprocessed surface from dusting with masking tape.
When applying, use kinks of body panels, stiffeners and moldings as the boundary of the protective coating.
Thoroughly mix the composition by shaking the balloon for 2-3 minutes until a clear knock of balls appears.
Apply 2-3 thin layers, spraying in even strips from a distance of 15-25 cm. It is advisable that each subsequent strip overlap the previous one by 2-3 cm. Shake the balloon periodically during operation.
Avoid smudging.
After use, turn the spray can over and press the spray valve for 1–2 seconds to clean the nozzle. Intermediate drying between coatings - 15 minutes. The car can be operated 2 hours after processing.