£22.05
On Hold
ABRO SPRAY ADHESIVE 326g
10 available
Details
Shipping: United Kingdom: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Clean and degrease bonded surfaces.
Shake the balloon for 1 minute after the ball knocks.
Keep the balloon parallel to the surface at a distance of 25-30 cm and apply glue in an even layer on both surfaces.
Allow the glue to dry for 1 minute, then firmly squeeze the bonded surfaces.
Curing takes place in 2-3 minutes.
After use, clean the spray gun by turning the bottle over and blowing off the head until the glue stops.
During operation, the temperature of the cylinder should be at least 15 ° C.
Easily cleansed with mineral alcohol or gasoline.
Shake the balloon for 1 minute after the ball knocks.
Keep the balloon parallel to the surface at a distance of 25-30 cm and apply glue in an even layer on both surfaces.
Allow the glue to dry for 1 minute, then firmly squeeze the bonded surfaces.
Curing takes place in 2-3 minutes.
After use, clean the spray gun by turning the bottle over and blowing off the head until the glue stops.
During operation, the temperature of the cylinder should be at least 15 ° C.
Easily cleansed with mineral alcohol or gasoline.
Other Products from autodoctorrussia (View All)
-
£22.42
-
£17.10
-
£17.27
-
£27.20
-
£13.97
-
£19.11
-
£19.19
-
£24.26
-
£13.97
-
£69.83
RU, RUSSIAN FEDERATION
