High Strength Sleeve Retainer is a one component,
solventless, fast curing, anaerobic adhesive/sealant. It is a
green colored liquid resin that hardens and cures in the
absence of air. Permatex High Strength Sleeve Retainer
self-hardens into a tough plastic material when it is confined
between close-fitting metal parts. The cured adhesive is a
thermoset plastic suitable for exposure to most solvents and
engine fluids. OEM Specified.
PRODUCT BENEFITS
• No mixing
• No curing outside of joint
• No on-torque adjustments needed
• Restores fit to worn assemblies
• Prevents fretting and corrosion
• Allows the use of slip fit or press fit
• For use on assemblies with gaps up to 0.007” diametral
TYPICAL APPLICATIONS
• Cylinder sleeves
• Valve seats
• Bearings and bushings
• Woodruff keys
• Liner assemblies
• Valve guides
DIRECTIONS FOR USE
1. Remove any grease or oil by using Permatex Brake &
Parts Cleaner.
2. For slip fitted assemblies, apply adhesive around the
leading edge of the collar and use a rotating motion
during assembly.
3. For press fits, adhesive should be applied thoroughly to
both bond surfaces and assembled at high press-on
rates.
4. For shrink fitted assemblies, the adhesive should be
coated onto the pin; the collar should then be heated to
create sufficient clearance for free assembly.
5. For faster cure rates, use Permatex Surface Prep on
both surfaces.
6. Parts should not be disturbed until sufficient handling
strength is achieved.
7. Any material that is on the outside of the assembly will
not cure. Wipe off with a dry cloth.