Multi-Metal products are two part,
filled epoxy adhesive systems. PermaPoxy Multi-Metal
epoxies are of a maximum strength formula that is available in
several working times. PermaPoxy Multi-Metal Epoxies are
ideal for complex, multi-piece assemblies. They are water and
solvent resistant and available in dual syringes or tubes.
PRODUCT BENEFITS
• Will not shrink
• Various curing cycles
• No clamping needed
• Fills gaps
• Dark grey color
• Impact resistant
• Water resistant
• High temperature resistant
TYPICAL APPLICATIONS
• Aluminum
• Brass
• Chrome
• Copper
• Iron
• Stainless Steel
• Steel
• Cast
DIRECTIONS FOR USE
1. Protect work area from accidental spills.
2. Surface must be clean, dry and free of grease & oil.
3. Roughen surfaces with sandpaper or other abrasives.
4. Use a sharp blade to cut off the tips of both nozzles.
5. Depress plunger on syringe or squeeze out of tubes
equal amounts of resin and hardener. Thoroughly mix
resin and hardener on a clean discardable surface for at
least one (1) minute or until uniform in color.
6. Apply to surfaces being repaired. Assemble parts
immediately. Remove excess epoxy immediately.
7. Allow bond to set for the fixture time before moving.