SPECIFICATION:Input Voltage: 100-240V AC, 50-60HzRated Output: 6V / 12V DC 1AMinimum Start Voltage: 2.0VThermal Protect : 65'C±5'CWorking Temperature: -20в„ѓ-40в„ѓStorage Temperature: -20в„ѓ-60в„ѓEfficiency: App. 85%.Dimension(L*W*H): 125 x 69 x 35 mmWeight: 210gPlug Size: EU Plug/US Plug(Optional)Charger Current: 1ADC Cable Length: 1.2MSAE Cable: 0.5MBattery Range: 4-60Ah (6V for 4AH - 20AH; 12V for 4AH - 60AH)Compliant Standards: CB,CE, IEC60335, EN61000, EN55014Fit For: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, etc.. FEATURES:в—ЏMicroprocessor Control (CPU).в—ЏFast Charge for Motorcycle battery.в—ЏOne-click wake-up and maintenance.в—ЏConstant current mode and cut off output after battery full.в—ЏCharging for car battery (no need remove the battery from the car).в—ЏSuitable for most battery types including Calcium, EFB, Gel and AGM, Wet batteries.в—ЏThis SMART 4-60AH FOXSUR 6V 12V 1A AUTOMATIC SMART BATTERY CHARGER MAINTAINER FOR CAR MOTORCYCLE SCOOTER DEEP CYCLE AGM GEL VRLA BATTERY CHARGER is the ideal accessory for charging your vehicle's Lead acid battery including Calcium, Gel, AGM, EFB, SLA, Wet batteries in a safe and easy way. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.  SAFETY PROTECTIONS:1.Automatically cut off output2.The charger will enter cut off output automatically when finished charge to prevent overcharge3.DC input short-circuit protection4.The charger will shut down automatically when DC input short-circuit.5.Over-temperature protection:The charger will shut down in two situations as below, and it will enter charge mode, automatically when temperature recover to the normal condition:a.when charger used long time under high temperatureb.When inside temperature of charger reaches the preset temperature6.Over-voltage protection7.Fire protection: There is no output in clamp when disconnect with battery to prevent sparks8.Low-voltage activation: The charger will enter the charge mode automatically when voltage of end of clamp was higher than DC 2V, the charger no output if voltage lower than DC 2v PACKAGE INCLUDED:1 x Battery Charger1 x English User Manual