Features:
-Food grade ABS material, green & healthy.
-Give good bean sprouts in just 2.5~4 days.
-Save electricity with PTC heating.
-Regulate temperature, pressure and humidity for thicker bean sprouts.
-A short circuit protection, safe for use.
-Prevent water spillage with automatic drainage spill water.
-Eliminate the hassles of changing water with fully automated water recycling system.
-360-degree sprinkler, to prevent uneven germination of beans.
-3 different seasons modes(Spring/ Autumn, Summer, Winter), you can make your own bean sprouts all over the year.
-3 layers design, save electricity, time and money.(There is no support/stand between 3 layer, the lower layer will uplift the upper layer automatically during sprouting)
-Convenient and easy to sprout your own at home.
-A sunshade cover is included.

Specifications:
NameBean Sprouts MachineColorGreenMaterialABS(Acrylonitrile Butadiene Styrene) PlasticDimensions260x330mm(Diameter x Heigth)Rated Voltage220V 50HzPower20WPump Power8WBean Sprouting Time2.5-4 daysLayer3 Layers
Usage:
1. Add water to the pan bottom until high water level.
2. Connect long water pipe and water pump outlet completely, to confirm that the cover can cover properly.
3. Put trays into the nurture container.
4. Put seed down to the tray. Pick those bad beans out. (grains or beans should be soaked in water for 1-2 hour before they are put into the machine)
5. Put the spray head on the long water pipe.
6. Close the nurture cover and fabric cover on the unit to prevent exposure to light nuts.
7. Click the power button and choose one season button.
(Note: When the temperature is below 18℃, recommended winter file.
When the temperature is between 18-28℃, recommended spring/autumn file.
When the temperature is above 28℃, recommended summer file.)
8. Leave for 2.4-4 days or as needed. Air temperature will be watered as we choose.

Operation:
1. Connect the power, press the power key, the power indicator will light all the time.
2. Then press one of the season keys, the machine starts to work, the season key indicator keep flashing.
3. When replace the water, directly disconnect the power, do not need to press any key, after replacing water, directly connect the power, do not need to press any key. The machine has a power-off memory function.
4. When complete, the machine will stop working, the season indicator light goes off, the power key indicator flashes.

Note:
1. Planting bean sprouts must use this year's beans, vintage beans is not easy to germinate, and easy to mold.
2. If beans soaked by water 30℃ above for too long time, the germination rate will be bad.
3. Transgenic beans can not grow bean sprouts.
4. Replace the water once a day.

Package Included:
1 x Bean Sprouts Machine
1 x Shading Cover