Description- white, grey, black.
For universal use
Excellent adhesion to various materials and surfaces
High elasticity
Can be used with homogeneous and dissimilar materials
Compensates for various stretching of materials
Reduces vibration and noise
Long crusting time
The ability to bond and seal complex and large parts
Moving parts after applying the composition
Possible subsequent priming and painting
After drying, the surfaces can be primed and painted without the use of primers
Suitable for use in mechanisms for the food industry (ISEGA certificate)
The composition is harmless to human health
Allowed for gluing and sealing parts in industries working with food
Non-corrosive
Without smell
Easily handled mechanically
Does not contain silicone

Specifications
Base: one-component polyurethane
Density (DIN 53479): 1.25 kg / l
Application temperature: +5 ... + 35 ° C
Skin formation time (at + 23 ° C and 50% humidity): 45-60 min
Curing speed (at + 23 ° C and 50% humidity): 3 mm in 24 hours
Volume change (DIN 52451): ~ -5%
Shore A hardness (DIN 53505): ~ 40
Tensile strength (DIN 53504): 1.8 N / mm²
Elongation to break (DIN 53504): ~ 500%
Pull-off strength (DIN 53515): ~ 6 N / mm
Elongation, compression during operation: ~ 15%
Bulk resistance (DIN 53482): ~ 10 GΩ × cm
Glass formation temperature: ~ -45 ° С
Heat resistance: -40 ... + 90 ° C (within 8 hours up to +120 ° C)
Resistance to: water, seawater, lime water, waste water, weak acids and alkalis
Temporary resistance: to fuels, mineral oils, vegetable and animal fats

Mode of application
The pre-opened cartridge is inserted into a hand or air gun for applying sealants (eg art. 0891.300.310), a replaceable nozzle is screwed on and the compound is applied to the surfaces to be sealed or glued. Before use on metals, it is recommended to apply a metal primer art. 0890.100.61, and prior to use on wood and concrete, use primer art. 0890.100.62. To accelerate the polymerization, it is recommended to pre-treat the surfaces with activator art. 0890.100.60. To remove sealant residues, use the remover art. 0890.100.63.

Application area
Designed for a wide range of applications in bonding and sealing materials such as metals, wood, stone, brick, concrete and plastics (polyester, heavy PVC).

Attention!

Avoid contact with alkyd polymer paints. Do not fill the gaps in the glass ends where UV rays are reflected. Direct sunlight can cause yellowing of the surface. Not suitable for bonding polyethylene, polyurethane, polytetrafluoroethylene, silicone seals.