Conductive glue on nickel is intended for repairing the heating threads of the rear window of a car with damage (breaks) of no more than two centimeters. The voltage supply of the busbar cannot be repaired with conductive adhesive.
Directions for use: Before applying, shake the contents of the bottle thoroughly with vigorous shaking. Separate the self-adhesive part of the stencil from the backing and stick it on the glass in the area of the heating thread break so that the break point is in the middle of the stencil slot. Apply one layer of glue to the glass through the stencil with a brush immediately after mixing, after a minute, reapply the second layer of glue. After the glue line has dried (after about 60 minutes), peel off the stencil. Complete drying of the glue line occurs after 2 hours at an ambient temperature of at least + 20 ° C. One tube is enough to restore damaged threads with a total length of up to 20 cm.