DSI Dental Implant Angulated Abutment M1.4 Multi Unit Full Set 8Pcs 45° 1mm
DSI M1.4 Angulated Full System 8pcs 45° 1mm Collar (Sleeve Fixation Screw is Ø1.4mm)
Compatible with: Zimmer, MIS, BioHorizon, Alpha Bio, Implant Direct etc.
DSI M1.4 Multi-Unit Abutment system provides the tools to restore almost any case, even compromised edentulous cases. DSI M1.4 Multi-Unit Abutments can overcome restorative challenges and they are highly recommended when creating a full arch screw-retained implant restoration.
No system better equips you to plan for your patients’ individual needs. The abutment’s intelligent design and restorative flexibility are matched only by its ease of use and surgical efficiency. It may as well be used in combination with an implant level framework design.
DSI M1.4 Multi-Unit Abutments are designed with a range of angle correction and are available for a large variety of implant systems on the market. DSI M1.4 Multi-Unit Abutments provide a passive draw and positive uniform seat for all abutment sites.
The advantages of using DSI M1.4 Multi-Unit Abutments far outweighs any of the concerns that can arise. You will have a much easier and more predictable seating of the final restoration. You will also create reduced stress translated into the restorative system due to the passive nature of the seating process of the DSI M1.4 Multi-Unit Abutments. Additionally, each time the patient has a recall appointment, it will be much easier to remove and replace the prosthesis.
Modified multi-unit abutment screw that has been made thicker, harder and much stronger so it can hold up a great amount of load without breaking in the patient's mouth.
Used to elevate seating platform of restoration when restoration at implant level is not indicated or practical due to the depth of the implant.
Carefully designed to accommodate both edentulous and partially edentulous arches.
Angulated design repositions the restorative platform aiming to improve prosthetic access and designed to facilitate the path of insertion of the prosthesis.
Provides maximum angulation correction to create a passive prosthetic fit.
Sculpted design provides optimal soft tissue contouring.
Low profile gives the advantage to use in a limited interocclusal space.
The increased angle (45°) provides angulation correction for off-axis implant placement and corrects up to 45° of divergence.
In addition, the abutment coming with the mounted key, and do not need to be adjusted with other instruments.
DSI M1.4 Multi-Unit Abutments and fixation base screws has a TiN (Titanium Nitrate) coating. The TiN coating only modifies surface properties and has no effect on the substrate properties or biomechanical functionality. The TiN coating has been also proven itself with improved friction and a higher surface scratch resistance.
Made of Titanium Grade 23
Titanium Grade 23 is a highly successful material for the fabrication of dental superstructures and implants, on account of its favorable combination of properties such as low specific weight, high strength to weight ratio, high modulus of elasticity, very high corrosion resistance and excellent general biocompatibility.
Low specific weight.
High strength-to-weight ratio.
High modulus of elasticity.
High corrosion resistance.
Excellent general biocompatibility.
LOT IS FOR 1 DSI ANGULATED MULTI-UNIT ABUTMENT SYSTEM 8pcs 45° 1mm COLLAR HEIGHT
DSI Multi-Unit Abutment System includes:
1 multi-unit abutment 45° 1mm
1 screw for multi-unit abutment
1 mounted key for multi-unit abutment
1 titanium sleeve
1 plastic sleeve
2 multi-unit screws for both of the sleeves Ø1.4mm