£6.32
Add to Cart
12V Mini Controller
12V Mini Controller Inline Dimmer With RF Wireless Remote for LED Strip Light US
This inline RF remote control dimmer switch offers a convenient way to control LED strip lights at a distance.
Choose from 8 levels of brightness, turn lights on or off, or choose a dynamic mode for added effect. Dynamic modes: gradual change, signal light, strobe, breathe, candlelight
This is an RF remote which does not require a line of sight between the remote and the controller box.
Voltage: 5-24V, Max Load: 12A (144W), Size: 42x12x3mm, Distance: 40 ft.
Bare wire connectors, Retains setting after power loss
Pairing Instructions:
The remote may need to be paired to the controller before first use. Connect the controller to a power source and to the LED strip, then press Speed + and Speed - simultaneously. The remote will broadcast a pairing signal and any controllers within range will now respond to the remote. Multiple controllers can respond to a single remote, so if you wish to use multiple controllers independently you must first unplug the power from all of the controllers except for the one that you wish to pair.
This inline RF remote control dimmer switch offers a convenient way to control LED strip lights at a distance.
Choose from 8 levels of brightness, turn lights on or off, or choose a dynamic mode for added effect. Dynamic modes: gradual change, signal light, strobe, breathe, candlelight
This is an RF remote which does not require a line of sight between the remote and the controller box.
Voltage: 5-24V, Max Load: 12A (144W), Size: 42x12x3mm, Distance: 40 ft.
Bare wire connectors, Retains setting after power loss
Pairing Instructions:
The remote may need to be paired to the controller before first use. Connect the controller to a power source and to the LED strip, then press Speed + and Speed - simultaneously. The remote will broadcast a pairing signal and any controllers within range will now respond to the remote. Multiple controllers can respond to a single remote, so if you wish to use multiple controllers independently you must first unplug the power from all of the controllers except for the one that you wish to pair.
ID, Jawa Tengah
