£6.75
Add to Cart
Plastic Working of Metals and Power-Press Operations by E.V. Crane ➤ John Wiley & Sons, Inc. 1932
Plastic Working of Metals and Power-Press Operations E.V. Crane John Wiley & Sons, Inc. 1932
Title: Plastic Working of Metals and Power-Press Operations
Author: E.V. Crane
Format: Hardcover
Publisher: John Wiley & Sons, Inc. 1932
Size: 6 x 9 * 326 pages
Synopsis: Text is illustrated with 254 figures; 25 tables; 13 charts and some interesting vintage photographs.
CONTENTS
I. MASS PRODUCTION.
1-Plastic Metal Working, the quantity production method, dis- tinguished from Metal Cutting Processes.
II. ESSENTIAL METALLURGY
9-Mechanics of metals, structure of metals, atoms, crystal structure, alloys, compressive and tensile movements, plastic range physical properties, grouping of operations according to stresses.
III. SHEARING METAL IN DIES
25-Progressive action and direction of stresses in shearing. Working pressures and effects of clearance, angular shear, hardness. Formulae. Die design data and definitions.
IV. THE SHEARING GROUP OF PRESS OPERATIONS
51-Blanking, piercing, perforating, shearing, parting, slitting, shaving, broaching, etc.
V. BENDING OPERATIONS
81-Metal movement in bending. Bending allowances. Effect of direction of rolling on metal. "Grain" and "Temper" of rolled metal. Classified operations.
VI. EXPANDING, CONTRACTING AND CURLING
101-Methods, limitations and theory of bulging, burring, flanging, beading, necking, curling and wiring.
Upper and lower
VII. COLD WORKING OF PLASTIC METALS Plasticity.
121-Experiments in strain-hardening. limits of the plastic range. Tentative rates of strain-hardening. The plastic cycle. Structural changes. Ductility differences. Temperature and plasticity. Hot- and cold-working. Rate and uniformity of plastic working.
VIII. THE DRAWING GROUP OF PRESS OPERATIONS.
150-Metal movement and stresses in drawing. Drawing formulae. Blank-holding theory. Blank and shell relations, redrawing limits and methods. Wall thickening and thinning. Ironing. Drawing rectangular and irregular shapes. Types of dies.
ix
CONTENTS
CHAPTER
IX. DRAWING SPEED, LUBRICATION, ANNEALING.
193-Limiting crankpin velocities. Lubricants used in drawing. Theory of annealing. Factors affecting recrystallization. Exces- sive grain growth. Strains and surface markings. Season crack-
ing. Testing drawing quality.
X. COLD OPERATIONS OF THE SQUEEZING GROUP
212-Volume changes in metal. "Pressure of fluidity" and rate of strain-hardening. Increasing yield points. Sizing, cold forging,coining, embossing.
XI. EXTRUSION
247-Metals, methods, hydraulic flow, applications.
XII. HOT PRESS FORGING.
259-Hot-working metal. Effect of speed. Chilling. Ferrous and non-ferrous forgings. Forging brass.
APPENDIX I. GRAPHICAL COMPUTATIONS.
277-Charts for quick computation of shearing, drawing, iron- ing, coining and forging pressures, work, speeds, press flywheel capacities, pressure capacities.
APPENDIX II. PROBLEMS
315
INDEX.
319
x
Overall Condition: Binding is tight. The text is clear and very readable throughout with a small number of pages at start and finish showing discoloration as does the original maroon cloth on the basically solid boards.
Secure shipping bubble-wrapped in a new box.
202--U.S. shipping for this (Three Pounds Media Mail) is $5.97 with tracking.
Multiple items will be combined for the lowest shipping price.
International Shipping cost is based on the destination so inquire before buying. Mobile users must scroll to the bottom and click on 'use desktop site' to bring up the Ask a Question link which sends me an email.
(PLEASE CONTACT ME BEFORE MAKING ANY PAYMENT FROM OUTSIDE THE U.S.)
==========================================================================================================================
Just about all the books are USED books. Some have been used more gently than others. Some have been in libraries and have typical library extras. Some are so old and/or interesting that they are being offered for the sake of preservation regardless of the condition they are in. If the condition of the book is very important to you, please feel free to click the 'Ask seller a question' link and I will tell you more.
==========================================================================================================================
Title: Plastic Working of Metals and Power-Press Operations
Author: E.V. Crane
Format: Hardcover
Publisher: John Wiley & Sons, Inc. 1932
Size: 6 x 9 * 326 pages
Synopsis: Text is illustrated with 254 figures; 25 tables; 13 charts and some interesting vintage photographs.
CONTENTS
I. MASS PRODUCTION.
1-Plastic Metal Working, the quantity production method, dis- tinguished from Metal Cutting Processes.
II. ESSENTIAL METALLURGY
9-Mechanics of metals, structure of metals, atoms, crystal structure, alloys, compressive and tensile movements, plastic range physical properties, grouping of operations according to stresses.
III. SHEARING METAL IN DIES
25-Progressive action and direction of stresses in shearing. Working pressures and effects of clearance, angular shear, hardness. Formulae. Die design data and definitions.
IV. THE SHEARING GROUP OF PRESS OPERATIONS
51-Blanking, piercing, perforating, shearing, parting, slitting, shaving, broaching, etc.
V. BENDING OPERATIONS
81-Metal movement in bending. Bending allowances. Effect of direction of rolling on metal. "Grain" and "Temper" of rolled metal. Classified operations.
VI. EXPANDING, CONTRACTING AND CURLING
101-Methods, limitations and theory of bulging, burring, flanging, beading, necking, curling and wiring.
Upper and lower
VII. COLD WORKING OF PLASTIC METALS Plasticity.
121-Experiments in strain-hardening. limits of the plastic range. Tentative rates of strain-hardening. The plastic cycle. Structural changes. Ductility differences. Temperature and plasticity. Hot- and cold-working. Rate and uniformity of plastic working.
VIII. THE DRAWING GROUP OF PRESS OPERATIONS.
150-Metal movement and stresses in drawing. Drawing formulae. Blank-holding theory. Blank and shell relations, redrawing limits and methods. Wall thickening and thinning. Ironing. Drawing rectangular and irregular shapes. Types of dies.
ix
CONTENTS
CHAPTER
IX. DRAWING SPEED, LUBRICATION, ANNEALING.
193-Limiting crankpin velocities. Lubricants used in drawing. Theory of annealing. Factors affecting recrystallization. Exces- sive grain growth. Strains and surface markings. Season crack-
ing. Testing drawing quality.
X. COLD OPERATIONS OF THE SQUEEZING GROUP
212-Volume changes in metal. "Pressure of fluidity" and rate of strain-hardening. Increasing yield points. Sizing, cold forging,coining, embossing.
XI. EXTRUSION
247-Metals, methods, hydraulic flow, applications.
XII. HOT PRESS FORGING.
259-Hot-working metal. Effect of speed. Chilling. Ferrous and non-ferrous forgings. Forging brass.
APPENDIX I. GRAPHICAL COMPUTATIONS.
277-Charts for quick computation of shearing, drawing, iron- ing, coining and forging pressures, work, speeds, press flywheel capacities, pressure capacities.
APPENDIX II. PROBLEMS
315
INDEX.
319
x
Overall Condition: Binding is tight. The text is clear and very readable throughout with a small number of pages at start and finish showing discoloration as does the original maroon cloth on the basically solid boards.
Secure shipping bubble-wrapped in a new box.
202--U.S. shipping for this (Three Pounds Media Mail) is $5.97 with tracking.
Multiple items will be combined for the lowest shipping price.
International Shipping cost is based on the destination so inquire before buying. Mobile users must scroll to the bottom and click on 'use desktop site' to bring up the Ask a Question link which sends me an email.
(PLEASE CONTACT ME BEFORE MAKING ANY PAYMENT FROM OUTSIDE THE U.S.)
==========================================================================================================================
Just about all the books are USED books. Some have been used more gently than others. Some have been in libraries and have typical library extras. Some are so old and/or interesting that they are being offered for the sake of preservation regardless of the condition they are in. If the condition of the book is very important to you, please feel free to click the 'Ask seller a question' link and I will tell you more.
==========================================================================================================================
