① 5-inch diameter suction cup. Good for auto dent repair, glass and tile lifting. Maximum horizontal capacity is 130 pounds; vertical suction is 110 pounds. Made with a quick-release handle and spring-loaded locking system. Easy to reposition. Sticks to clean, non-porous surfaces. Durable shell. Extra strength rubber seal won't scratch paint② With a heavy duty body, this suction cup lifts up to maximum 130 pounds in horizontal; 110 pounds in vertical suction③ A lifting suction cup is a useful tool for lifting glass surfaces, tiles, and other delicate materials. By creating a vacuum between the cup and the surface, lifting suction cups allow you to lift from the center of a glass panel, and they can be used in pairs for extra control and weight distribution④ With a 5-inch suction cup, this lifter is best suited for dent pulling and lifting tile, glass etc.Warm Reminder: 1.Use the suction cup dent puller from the shallow concave line start a little operation, cannot directly operate in the middle, patient little by little operation, will not leave a trace. 2.Use boiling water, heat gun or hair dryer heat up the dent surface to make sure there is good suction condition before lifting. 3.This dent repair puller will not be used if the car is covered in paint, torn paint, badly cracked or scratched. Product Description Caution (1) When using vacuum sucker to hold or lift heavy objects, it is strictly prohibited to exceed 40% of the theoretical holding force, in order to prevent overload and cause the weight to fall off (2) In case of failure due to aging of the sucker, a new vacuum sucker should be replaced in time (3) In the process of use, must keep the vacuum pressure stable Work Tools Make Your Jobs Easier Normally used for a flat, airtight surface Ceramic tileGlassIron platePaint woodStoneCar dent Horizontal Force: 130 poundsVertical Force: 110 pounds Versatile - It is reusable and can be used on where a smaller suction cup puller couldn’t reach Easy to Use - Push the cup firmly onto the surface, lock the suction lever, and swirl the suction in broad sweeps Durable - The puller includes a spring-loaded locking handle, and the rubber allows for gentle and scratch-free use Work Tools, Wide Range of Application Ceramic Tile Glass Iron Plate Side Dent Instruction of Use Before use,please make sure the suction surface is clean,dry,and free from oil, dirt.Place the suction cup over the object with smooth flat surface.Pull the double handle to up position for suction.The suction is now activated and you can move or lift the object. Warm Tips: Please Make sure the suction is stable enough before lifting and moving the object. Track Page Views WithAuctiva's Counter