OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100Mbps ethernet dataINPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injectorPLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outletAPPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more. please note: this spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devicesWARRANTY: 2 years and unlimited technical support, Package content: 2x 5V PoE splitter The PoE Splitter splits a PoE signal into an 5VDC power and 10/100Mbps ethernet data source. This device allows you to run ethernet cables from a PoE Switch over long distance, and then split the PoE signal into a separate data signal and 5Vdc power sources in order to run an non-PoE devices. Specifications: Input: 44-56VDC max ; Shielded RJ-45 female; Output: 5VDC 2.4A 12W Max., DC Jack: plug: 3.5mm x 1.35mm and 5.5mm x 2.1mm Length of output cable: 19.0cm Operating Ambient Temperature: -10 to 45℃ Regulatory IEEE 802.3af What is included 2x 5V PoE splitter Note: this 5V PoE spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices. Track Page Views WithAuctiva's Counter