Covert BNC analog signals to HDMI signals. It only work for ANALOG CAMERA. It can't convert cable TV signal, can't convert digital camera or AHD/TVI/CVI camera, ONLY FOR ANALOG CAMERA. Before you purchase it, please check your device is an analog camera.Support and automatically detect input signal in PAL/NTSC_M/NTSC4.43/SECAM/PAL-M/PAL-N format, Plug and Play.HDMI output resolution:720P@50/60Hz,1080P@50/60Hz;HDMI1.3 and HDCP1.2.The resolution can reach up to 1920*1080 on LED LCTV.Adopt a New Generation of Low-power-consumption Digital Chip, allowing 24-hour uninterrupted and stable work,low heat releasing.3D Compensation Technology: Motion Optimization, Color Optimization and Digital Noise Reduction . Product Description Coverts BNC analog signals to HDMI signals, making it possible to use a normal HDMI ready display to replace expensive LCD video monitor and view BNC video signal. It utilizes 3D compensation technology to provide advanced signal processing with great precision, colors and resolutions.The converter can convert the audio and video signals of 480I (NTSC)/576I (PAL) format to 720P/1080P HD HDMI signals. The item is the ideal solution for BNC sources such as security cameras, surveillance DVRs and multiplexers. It can upscale 480I (NTSC)/576I (PAL) BNC signals to 720P/1080P so you can view your security footage in HD. Common Troubleshooting Solution 1. No signal or no image a. Make sure the connected direction is BNC analog signals to HDMI signals. b. Make sure the signal device is analog camera. c. Make sure all power plugs are correctly inserted into the power sockets and check if the power is on. d. If output monitor is PC monitor, HDTV, or projector, please adjust the device to HDMI mode 2. Image blur a. Reconnect the connection port to prevent poor contact of the socket interface. b. Check the cables quality (cables are in good condition and HDMI cable requirements meet the HDMI 1.3 standard). No Drivers Required,Plug and Play - Automatic scaler scales standard 480I BNC signals to HD 720P/1080p signals. - If output monitor is PC monitor, HDTV, or projector, please adjust the device to HDMI mode - Detects and switches between PAL / NTSC automatically. - HDMI1.3 and HDCP1.2. Use for Analog Camera Before you purchase it, please check your device is an analog camera. This adapter can not fit the digital camera. Note:This converter will not convert SDI,HD-TVI, CVI, or AHD signals since those are not in NTSC. Input From BNC Connector+ Audio Outputs to HDMI monitor or capture card via HDMI jack. BNC connector is different with cable TV's interface.You can't use it for cable TV box. Compact Size It is light weight and simple to operate. What's in the Box? 1x BNC to HDMI Converter 1x Power Adapter 1x User Manual Track Page Views WithAuctiva's Counter