【Design Upgrade】 Wax seal molds kit are made of strong unbendable metal,so the heated was doesn’t seep behind the mold during stamping. The molds have raised edges so that you can lift for removal without touching the seal itself. the weight of the tool help to keep the stamping surface (an envelope, or folded piece of paper, or whatever) flat, so, you can get the perfect seal right on your envelope from the first pour.【Product Features】 Our wax seal set has 3 different shapes of molds, you can make perfect round and flower shaped wax seal with wax stamp, so you don't have to worry about making incomplete wax seals when you use it. This mold is suitable for about 1 inch wax seal, and only 3-4 pieces of wax are needed to make a wax seal with a size of about 1.2 inches, which can help you save more wax and make more wax seals.【Non-stick&Easy to Use】 There are two ways to use wax seal molds, one is to put the metal mold directly on the envelope and pour the melted wax into the metal mold, seal on the wax and wait a few seconds to cool, then remove the mold to get the completed wax seal. The second is to pour the melted wax on the silicone mat, then put the seal on and wait for a few seconds to remove the wax seal. Simple but elegant!【Great Packaging】 Includes the three molds, a silicone mat - perfect for keeping your work surface clean when making your seals. and a clear storage box for all pieces. These molds are a great to have in your craft tool stash.【Wide Scope of Applications:】 This wax seal stamp rings set can be applied to decorate your wedding, party invitations, greeting cards, wine wrapping, gift wrapping, envelopes, scrapbooks, documents and more;This takes your wax rings to a whole new level. You can make your wax seals look like a flower instead of just a circle and you can use this again and again. Product Description This Wax Seal Molds helps determine placement and size for seal. They prevent sloppy and make your sealing of letters look very nice. Ideally, you want probably 3-4 beads of wax. If you are using a stick you'll have to estimate the same amount. When you fill the mold ring you probably want it to fill up about 3/4 of the inside to leave enough space for the wax to expand outwards as you press in your stamp head. The right amount of wax is essential for a good look. This is best used with a wax seal head that is 1" (25mm). It can be used with smaller heads, but not really with anything larger. If you have a smaller wax seal head then you may find you need to use 4 beads since not as much wax is displaced by the stamp head.