£310.75
Add to Cart
SPL-Lab Wireless WiFi Bass Meter v3
More than 10 available
Details
Shipping: United Kingdom: free (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Wired and wireless data transfer
Supports Windows, Android and iOS
Battery life up to 3 hours
Frequency range from 10 to 120 Hz
Amplitude range from 110 to 190 dB
Calibrated according to the TERM-LAB
Free software for Windows
Description
The Wireless Bass Meter TE is intended for measuring the noise level and sound pressure at the low frequency. The measured signal can be provided by both the industrial equipment and the acoustic systems. The distinctive feature of the noise meter is its ease of use and mobility. No more wires! It allows taking measurements in complex environment, where use of wired devices is problematic. Owing to the built-in ADC measured signal is digitalized inside the device and sent to your PC or smartphone/tablet PC via wireless network (WiFi) without alterations. Usage of the solid-state pressure transducer allows receiving results with high accuracy of 0.1 dB. Another distinctive feature of this device is the LAB-BUS port for connecting external sensors of the NEXT-LAB series. Provided there are external sensors, it allows taking measurements of not only sound pressure, but also the voltage-current characteristics of electric circuits (when using the NEXT-LAB Power Sensor), amplitude-frequency characteristics or noise level of the acoustic system over the entire audible range (when using NEXT-LAB RTA Microphone). Also, if additional NEXT-LAB SPL Sensor is connected, it is possible to measure the sound pressure from two sources simultaneously.
Ergonomics
The Wireless Bass Meter device is performed as a monoblock, combining the high-frequency solid-state sensor, ADC module and WiFi module. The device has Power button, LED, USB port and a feature button and LAB-BUS port for connecting the external sensors. There is of charging completion indication and low battery level indication. At the back cover there are vacuum suction cups for affixing the device on any smooth surfaces, for example, glass. The case of the device is made of the shockproof plastic material.
Functions
Measuring the characteristics of the home, car or concert hall acoustic systems
Setting the acoustic systems, e.g. subwoofer
Measuring the noise level
Preparing to autosound competitions on unlimited sound pressure (AMT, EMMA, dB Drag, IASCA, BassRace, etc.)
Holding the auto sound contests
Measuring the sound pressure level (SPL)
Performing spectral analysis of a signal - getting the AFC
Receiving and analysing the signal waveform
Possibility of simultaneous work with two signal sources.
Supports Windows, Android and iOS
Battery life up to 3 hours
Frequency range from 10 to 120 Hz
Amplitude range from 110 to 190 dB
Calibrated according to the TERM-LAB
Free software for Windows
Description
The Wireless Bass Meter TE is intended for measuring the noise level and sound pressure at the low frequency. The measured signal can be provided by both the industrial equipment and the acoustic systems. The distinctive feature of the noise meter is its ease of use and mobility. No more wires! It allows taking measurements in complex environment, where use of wired devices is problematic. Owing to the built-in ADC measured signal is digitalized inside the device and sent to your PC or smartphone/tablet PC via wireless network (WiFi) without alterations. Usage of the solid-state pressure transducer allows receiving results with high accuracy of 0.1 dB. Another distinctive feature of this device is the LAB-BUS port for connecting external sensors of the NEXT-LAB series. Provided there are external sensors, it allows taking measurements of not only sound pressure, but also the voltage-current characteristics of electric circuits (when using the NEXT-LAB Power Sensor), amplitude-frequency characteristics or noise level of the acoustic system over the entire audible range (when using NEXT-LAB RTA Microphone). Also, if additional NEXT-LAB SPL Sensor is connected, it is possible to measure the sound pressure from two sources simultaneously.
Ergonomics
The Wireless Bass Meter device is performed as a monoblock, combining the high-frequency solid-state sensor, ADC module and WiFi module. The device has Power button, LED, USB port and a feature button and LAB-BUS port for connecting the external sensors. There is of charging completion indication and low battery level indication. At the back cover there are vacuum suction cups for affixing the device on any smooth surfaces, for example, glass. The case of the device is made of the shockproof plastic material.
Functions
Measuring the characteristics of the home, car or concert hall acoustic systems
Setting the acoustic systems, e.g. subwoofer
Measuring the noise level
Preparing to autosound competitions on unlimited sound pressure (AMT, EMMA, dB Drag, IASCA, BassRace, etc.)
Holding the auto sound contests
Measuring the sound pressure level (SPL)
Performing spectral analysis of a signal - getting the AFC
Receiving and analysing the signal waveform
Possibility of simultaneous work with two signal sources.
